Skip to main content
Onsite Calibration Onsite Capability Matrix

Onsite Capability Matrix

The benefits of having your gages calibrated onsite are tremendous.

We would love to be able to calibrate all your gages at your facility. Unfortunately, due to the precise nature of some of the equipment, even with one of the broadest onsite calibration scope in the industry, it is just not possible to do so.

Don’t worry. If some of your equipment can’t be done onsite, our technicians will take the equipment back to our laboratory with them (saving you time and money) and have it back to you in 3-5 days.

Please check out our service capability matrix below to see where your equipment falls

Upon reviewing the matrix, you can schedule an onsite calibration with Fox Valley Metrology today!

Please note many additional equipment types are supported. If you do not see your equipment type listed, please contact us today!

Gage Type Department Category Onsite Calibration Laboratory Calibration
1-2-3 & 2-4-6 Blocks Hard Gage Hard Gage Calibration Quote
Accelerometers Mechanical Force/Torque/Tension Calibration Quote
Air Gage Setting Plugs Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Air Gage Setting Rings Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Air Gages Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Alignment Pins & Plugs Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Ammeters Electronic Electronic Schedule an Onsite Calibration Quote
Amplifiers Electronic Electronic Schedule an Onsite Calibration Quote
Anemometers Mechanical Flow Schedule an Onsite Calibration Quote
Angle Blocks Hard Gage Hard Gage Calibration Quote
Angle Gages Hard Gage Hard Gage Calibration Quote
Angle Plates Hard Gage Hard Gage Calibration Quote
Articulated Arm Coordinate Measuring Machines Mechanical Dimensional Inspection Schedule an Onsite Calibration Quote
Auto Clay Washers Mechanical Foundry Schedule an Onsite Calibration Quote
Balances Mechanical Mass Schedule an Onsite Calibration Quote
Barometers Mechanical Pressure Calibration Quote
Belt Tension Meters Mechanical Force/Torque/Tension Schedule an Onsite Calibration Quote
Bench Centers Hand Tool Hand Tool Calibration Quote
Bench Micrometers Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Bi-Metallic Thermometers Mechanical Temperature/Humidity Schedule an Onsite Calibration Quote
Bore Gage Calibrators Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Bore Gages Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Bridge Circuits Electronic Electronic Schedule an Onsite Calibration Quote
Brinell Microscopes Mechanical Hardness Schedule an Onsite Calibration Quote
Cable Tension Meters Mechanical Force/Torque/Tension Calibration Quote
Calibration Bars Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Calibration Cones Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Calibration Spheres Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Calipers Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Capacitance Meters Electronic Electronic Schedule an Onsite Calibration Quote
Capacitors Electronic Electronic Calibration Quote
Center Finders Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Chamfer Gages Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Charge Amplifiers Electronic Electronic Schedule an Onsite Calibration Quote
Chart Recorders Mechanical Process Control Schedule an Onsite Calibration Quote
Chemical Analyzers Mechanical Chemical Schedule an Onsite Calibration Quote
Clamp Meters Electronic Electronic Schedule an Onsite Calibration Quote
Coaxial Indicators Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Combination Squares Hand Tool Hand Tool Calibration Quote
Compactability Testers Mechanical Foundry Schedule an Onsite Calibration Quote
Concentricity Gages Hard Gage Hard Gage Calibration Quote
Conductance Meters  Electronic Chemical Schedule an Onsite Calibration Quote
Conductivity Meters Mechanical Chemical Schedule an Onsite Calibration Quote
Conductivity Standard Solutions Mechanical Chemical Schedule an Onsite Calibration Quote
Contour Measuring Machines Mechanical Dimensional Inspection Schedule an Onsite Calibration Quote
Coordinate Measuring Machines Mechanical Dimensional Inspection Schedule an Onsite Calibration Quote
Crimpers Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Current Probes Electronic Electronic Schedule an Onsite Calibration Quote
Current Shunts Electronic Electronic Schedule an Onsite Calibration Quote
Cylindrical Plugs* Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Cylindrical Rings* Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Cylindrical Squares Hard Gage Hard Gage Calibration Quote
Data Loggers Mechanical Process Control Schedule an Onsite Calibration Quote
Deadweight Testers Mechanical Pressure Calibration Quote
Decade Boxes Electronic Electronic Schedule an Onsite Calibration Quote
Depth Gages Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Depth Masters Hard Gage Hard Gage Calibration Quote
Depth Micrometers Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Differential Pressure Gages Mechanical Pressure Schedule an Onsite Calibration Quote
Digital Readout Mechanical Process Control Schedule an Onsite Calibration Quote
Digital Thermometers Mechanical Temperature/Humidity Schedule an Onsite Calibration Quote
Dispensers Mechanical Chemical Schedule an Onsite Calibration Quote
Dry Well Temperature Calibrators Mechanical Temperature/Humidity Schedule an Onsite Calibration Quote
Durometer Test Blocks Mechanical Hardness Calibration Quote
Durometers Mechanical Hardness Schedule an Onsite Calibration Quote
Dynamometers Mechanical Force/Torque/Tension Schedule an Onsite Calibration Quote
Environmental Chambers Mechanical Temperature/Humidity Schedule an Onsite Calibration Quote
ESR Meters Electronic Electronic Schedule an Onsite Calibration Quote
Feeler Gages Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Film Thickness Gages Mechanical Surface Finish Schedule an Onsite Calibration Quote
Flow Meters Mechanical Flow Calibration Quote
Force Gages* Mechanical Force/Torque/Tension Schedule an Onsite Calibration Quote
Freezers Mechanical Temperature/Humidity Schedule an Onsite Calibration Quote
Frequency Counters Mechanical Time & Frequency Schedule an Onsite Calibration Quote
Function Generators Electronic Electronic Schedule an Onsite Calibration Quote
Furnaces Mechanical Temperature/Humidity Schedule an Onsite Calibration Quote
Gage Amplifiers Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Gage Blocks Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Gauss Meters Electronic Electronic Schedule an Onsite Calibration Quote
Gear Wires Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Glass Thermometers Mechanical Temperature/Humidity Schedule an Onsite Calibration Quote
Gloss Standards Mechanical Surface Finish Schedule an Onsite Calibration Quote
Glossmeters Mechanical Surface Finish Schedule an Onsite Calibration Quote
Green Hardness Testers Mechanical Hardness Schedule an Onsite Calibration Quote
Grounding Wrist/Heel Strap Testers Electronic Electronic Schedule an Onsite Calibration Quote
Grounding Wrist/Heel Straps Electronic Electronic Schedule an Onsite Calibration Quote
Hardness Standards Mechanical Hardness Schedule an Onsite Calibration Quote
Hardness Testers Mechanical Hardness Schedule an Onsite Calibration Quote
Height Gage Riser Blocks Hand Tool Hand Tool Calibration Quote
Height Gages Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Height Masters Hand Tool Hand Tool Calibration Quote
High/Low Limit Switches Electronic Electronic Schedule an Onsite Calibration Quote
Hipot Testers Electronic Electronic Schedule an Onsite Calibration Quote
Humidity Meters Mechanical Temperature/Humidity Schedule an Onsite Calibration Quote
Humidity Recorders Mechanical Temperature/Humidity Schedule an Onsite Calibration Quote
Hygrometers Mechanical Temperature/Humidity Calibration Quote
Indicator Calibrators Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Indicators Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Inductors Electronic Electronic Schedule an Onsite Calibration Quote
Infrared Thermometers Mechanical Temperature/Humidity Schedule an Onsite Calibration Quote
Inside Micrometers Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Kalmasters Hard Gage Hard Gage Calibration Quote
Leeb Hardness Testers Mechanical Hardness Schedule an Onsite Calibration Quote
Length Standards Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Levels Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Light Meters Electronic Electronic Schedule an Onsite Calibration Quote
Load Cells Mechanical Force/Torque/Tension Schedule an Onsite Calibration Quote
Magnetic Thickness Testers Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Magnetometers Electronic Electronic Schedule an Onsite Calibration Quote
Magnification Check Scales Mechanical Optics Schedule an Onsite Calibration Quote
Manometers Mechanical Pressure Schedule an Onsite Calibration Quote
Master Discs* Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Megohmmeter Electronic Electronic Schedule an Onsite Calibration Quote
Melt Flow Indexer Mechanical Flow Schedule an Onsite Calibration Quote
Micrometer Masters Hard Gage Hard Gage Calibration Quote
Microscopes Mechanical Optics Schedule an Onsite Calibration Quote
Moisture Analyzers Mechanical Chemical Schedule an Onsite Calibration Quote
Mold Strength Testers Mechanical Foundry Schedule an Onsite Calibration Quote
Multimeters Electronic Electronic Schedule an Onsite Calibration Quote
Ohmmeters Electronic Electronic Schedule an Onsite Calibration Quote
Optical Attenuators Electronic Fiber Optics Schedule an Onsite Calibration Quote
Optical Comparators Mechanical Dimensional Inspection Schedule an Onsite Calibration Quote
Optical Flats Mechanical Optics Calibration Quote
Optical Power Meters Electronic Fiber Optics Schedule an Onsite Calibration Quote
Electronic Fiber Optics Schedule an Onsite Calibration Quote
Electronic Electronic Schedule an Onsite Calibration Quote
Outside Micrometers Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Mechanical Temperature/Humidity Schedule an Onsite Calibration Quote
Panel Meters Mechanical Process Control Schedule an Onsite Calibration Quote
Parallels Hard Gage Hard Gage Calibration Quote
Permeability Standards Mechanical Foundry Schedule an Onsite Calibration Quote
Mechanical Foundry Schedule an Onsite Calibration Quote
Mechanical Chemical Schedule an Onsite Calibration Quote
Hand Tool Hand Tool Calibration Quote
Pin Brinell Hardness Testers Mechanical Hardness Schedule an Onsite Calibration Quote
Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Mechanical Chemical Schedule an Onsite Calibration Quote
Hand Tool Hand Tool Calibration Quote
Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Power Analyzers Electronic Electronic Schedule an Onsite Calibration Quote
Electronic Electronic Schedule an Onsite Calibration Quote
Electronic Electronic Schedule an Onsite Calibration Quote
Pressure Calibrators Mechanical Pressure Schedule an Onsite Calibration Quote
Mechanical Pressure Schedule an Onsite Calibration Quote
Mechanical Pressure Schedule an Onsite Calibration Quote
Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Electronic Radio Frequency (RF) Schedule an Onsite Calibration Quote
Electronic Radio Frequency (RF) Schedule an Onsite Calibration Quote
Radiometers Electronic Electronic Schedule an Onsite Calibration Quote
Hard Gage Hard Gage Calibration Quote
Hard Gage Hard Gage Calibration Quote
Refractometers Mechanical Chemical Schedule an Onsite Calibration Quote
Mechanical Temperature/Humidity Schedule an Onsite Calibration Quote
Resistance Temperature Detector Mechanical Temperature/Humidity Schedule an Onsite Calibration Quote
Resistors Electronic Electronic Schedule an Onsite Calibration Quote
Mechanical Optics Schedule an Onsite Calibration Quote
Rockwell Superficial Testers Mechanical Hardness Schedule an Onsite Calibration Quote
Roundness Standards Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Roundness Testers Mechanical Dimensional Inspection Schedule an Onsite Calibration Quote
Sand Rammers Mechanical Foundry Schedule an Onsite Calibration Quote
Mechanical Foundry Schedule an Onsite Calibration Quote
Scale Lupes Mechanical Optics Calibration Quote
Mechanical Mass Schedule an Onsite Calibration Quote
Scopemeters Electronic Electronic Schedule an Onsite Calibration Quote
Hard Gage Hard Gage Calibration Quote
Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Shadowgraph Comparators Mechanical Dimensional Inspection Schedule an Onsite Calibration Quote
Signal Generators Electronic Electronic Schedule an Onsite Calibration Quote
Hard Gage Hard Gage Calibration Quote
Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Soldering Irons Electronic Electronic Schedule an Onsite Calibration Quote
Soldering Pots Electronic Electronic Schedule an Onsite Calibration Quote
Electronic Electronic Schedule an Onsite Calibration Quote
Electronic Electronic Schedule an Onsite Calibration Quote
Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Spectrum Analyzers Electronic Electronic Schedule an Onsite Calibration Quote
Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Hard Gage Hard Gage Calibration Quote
Spring Testers Mechanical Force/Torque/Tension Schedule an Onsite Calibration Quote
Hand Tool Hand Tool Calibration Quote
Mechanical Optics Calibration Quote
Hand Tool Hand Tool Calibration Quote
Mechanical Time & Frequency Schedule an Onsite Calibration Quote
Hand Tool Hand Tool Calibration Quote
Strip Recorders Mechanical Process Control Schedule an Onsite Calibration Quote
Stroboscopes Mechanical Time & Frequency Schedule an Onsite Calibration Quote
Surface Finish Standards Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Mechanical Dimensional Inspection Schedule an Onsite Calibration Quote
Surface Profile Gages Mechanical Surface Finish Schedule an Onsite Calibration Quote
Mechanical Surface Finish Schedule an Onsite Calibration Quote
Mechanical Time & Frequency Schedule an Onsite Calibration Quote
Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Taper Gages Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Hard Gage Hard Gage Calibration Quote
Hard Gage Hard Gage Calibration Quote
Hand Tool Hand Tool Calibration Quote
Temperature Calibrators Mechanical Temperature/Humidity Schedule an Onsite Calibration Quote
Mechanical Temperature/Humidity Schedule an Onsite Calibration Quote
Temperature Recorders Mechanical Temperature/Humidity Schedule an Onsite Calibration Quote
Tensile Testers Mechanical Force/Torque/Tension Schedule an Onsite Calibration Quote
Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Thermistors Mechanical Temperature/Humidity Schedule an Onsite Calibration Quote
Mechanical Temperature/Humidity Schedule an Onsite Calibration Quote
Thermohygrometers Mechanical Temperature/Humidity Schedule an Onsite Calibration Quote
Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Thickness Standards Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Hard Gage Hard Gage Schedule an Onsite Calibration Quote
Hard Gage Hard Gage Calibration Quote
Timers Mechanical Time & Frequency Schedule an Onsite Calibration Quote
Mechanical Force/Torque/Tension Schedule an Onsite Calibration Quote
Torque Testers Mechanical Force/Torque/Tension Calibration Quote
Torque Transducers Mechanical Force/Torque/Tension Calibration Quote
Torque Watches Mechanical Force/Torque/Tension Schedule an Onsite Calibration Quote
Mechanical Force/Torque/Tension Schedule an Onsite Calibration Quote
Hand Tool Hand Tool Calibration Quote
Hand Tool Hand Tool Schedule an Onsite Calibration Quote
Ultrasonic Thickness Testers Mechanical Surface Finish Schedule an Onsite Calibration Quote
Mechanical Dimensional Inspection Schedule an Onsite Calibration Quote
Hard Gage Hard Gage Calibration Quote
Mechanical Pressure Schedule an Onsite Calibration Quote
Mechanical Dimensional Inspection Schedule an Onsite Calibration Quote
Mechanical Chemical Calibration Quote
Mechanical Chemical Schedule an Onsite Calibration Quote
Voltmeters Electronic Electronic Schedule an Onsite Calibration Quote
Mechanical Mass Calibration Quote
X-Y Recorders Mechanical Process Control Schedule an Onsite Calibration Quote
Mechanical Chemical Calibration Quote

*Some limitations. Please contact us today to learn more.

person with gear

Onsite Calibration

All of the benefits. None of the hassle.

Schedule Today