Skip to the content

Menu

On-Site Capability Matrix

The benefits of having your gages calibrated on-site are tremendous. We would love to be able to calibrate all your gages at your facility.

Unfortunately, due to the precise nature of some of the equipment, even with one of the broadest on-site calibration scope in the industry, it is just not possible to do so.

Don't worry. If some of your equipment can't be done on-site, our technicians will take the equipment back to our laboratory with them (saving you time and money) and have it back to you in 3-5 days.

Please check out our service capability matrix below to see where your equipment falls and schedule an on-site calibration with Fox Valley Metrology today!

Please note many additional equipment types are supported. If you do not see your equipment type listed, please contact us today!

Gage Type

Department

Category

On-Site Calibration

Laboratory Calibration
1-2-3 & 2-4-6 Blocks Hard Gage Hard Gage   Calibration Quote
Accelerometers Mechanical Force/Torque/Tension   Calibration Quote
Air Gage Setting Plugs Hard Gage Hard Gage Schedule On-Site Calibration Quote
Air Gage Setting Rings Hard Gage Hard Gage Schedule On-Site Calibration Quote
Air Gages Hand Tool Hand Tool Schedule On-Site Calibration Quote
Alignment Pins & Plugs Hard Gage Hard Gage Schedule On-Site Calibration Quote
Ammeters Electronic Electronic Schedule On-Site Calibration Quote
Amplifiers Electronic Electronic Schedule On-Site Calibration Quote
Anemometers Mechanical Flow Schedule On-Site Calibration Quote
Angle Blocks Hard Gage Hard Gage   Calibration Quote
Angle Gages Hard Gage Hard Gage   Calibration Quote
Angle Plates Hard Gage Hard Gage   Calibration Quote
Articulated Arm Coordinate Measuring Machines Mechanical Dimensional Inspection Schedule On-Site Calibration Quote
Auto Clay Washers Mechanical Foundry Schedule On-Site Calibration Quote
Balances Mechanical Mass Schedule On-Site Calibration Quote
Barometers Mechanical Pressure   Calibration Quote
Belt Tension Meters Mechanical Force/Torque/Tension Schedule On-Site Calibration Quote
Bench Centers Hand Tool Hand Tool   Calibration Quote
Bench Micrometers Hand Tool Hand Tool Schedule On-Site Calibration Quote
Bi-Metallic Thermometers Mechanical Temperature/Humidity Schedule On-Site Calibration Quote
Bore Gage Calibrators Hand Tool Hand Tool Schedule On-Site Calibration Quote
Bore Gages Hand Tool Hand Tool Schedule On-Site Calibration Quote
Bridge Circuits Electronic Electronic Schedule On-Site Calibration Quote
Brinell Microscopes Mechanical Hardness Schedule On-Site Calibration Quote
Cable Tension Meters Mechanical Force/Torque/Tension   Calibration Quote
Calibration Bars Hard Gage Hard Gage Schedule On-Site Calibration Quote
Calibration Cones Hard Gage Hard Gage Schedule On-Site Calibration Quote
Calibration Spheres Hard Gage Hard Gage Schedule On-Site Calibration Quote
Calipers Hand Tool Hand Tool Schedule On-Site Calibration Quote
Capacitance Meters Electronic Electronic Schedule On-Site Calibration Quote
Capacitors Electronic Electronic   Calibration Quote
Center Finders Hand Tool Hand Tool Schedule On-Site Calibration Quote
Chamfer Gages Hand Tool Hand Tool Schedule On-Site Calibration Quote
Charge Amplifiers Electronic Electronic Schedule On-Site Calibration Quote
Chart Recorders Mechanical Process Control Schedule On-Site Calibration Quote
Chemical Analyzers Mechanical Chemical Schedule On-Site Calibration Quote
Clamp Meters Electronic Electronic Schedule On-Site Calibration Quote
Coaxial Indicators Hand Tool Hand Tool Schedule On-Site Calibration Quote
Combination Squares Hand Tool Hand Tool   Calibration Quote
Compactability Testers Mechanical Foundry Schedule On-Site Calibration Quote
Concentricity Gages Hard Gage Hard Gage   Calibration Quote
Conductance Meters  Electronic Chemical Schedule On-Site Calibration Quote
Conductivity Meters Mechanical Chemical Schedule On-Site Calibration Quote
Conductivity Standard Solutions Mechanical Chemical Schedule On-Site Calibration Quote
Contour Measuring Machines Mechanical Dimensional Inspection Schedule On-Site Calibration Quote
Coordinate Measuring Machines Mechanical Dimensional Inspection Schedule On-Site Calibration Quote
Crimpers Hand Tool Hand Tool Schedule On-Site Calibration Quote
Current Probes Electronic Electronic Schedule On-Site Calibration Quote
Current Shunts Electronic Electronic Schedule On-Site Calibration Quote
Cylindrical Plugs* Hard Gage Hard Gage Schedule On-Site Calibration Quote
Cylindrical Rings* Hard Gage Hard Gage Schedule On-Site Calibration Quote
Cylindrical Squares Hard Gage Hard Gage   Calibration Quote
Data Loggers Mechanical Process Control Schedule On-Site Calibration Quote
Deadweight Testers Mechanical Pressure   Calibration Quote
Decade Boxes Electronic Electronic Schedule On-Site Calibration Quote
Depth Gages Hand Tool Hand Tool Schedule On-Site Calibration Quote
Depth Masters Hard Gage Hard Gage   Calibration Quote
Depth Micrometers Hand Tool Hand Tool Schedule On-Site Calibration Quote
Differential Pressure Gages Mechanical Pressure Schedule On-Site Calibration Quote
Digital Readout Mechanical Process Control Schedule On-Site Calibration Quote
Digital Thermometers Mechanical Temperature/Humidity Schedule On-Site Calibration Quote
Dispensers Mechanical Chemical Schedule On-Site Calibration Quote
Dry Well Temperature Calibrators Mechanical Temperature/Humidity Schedule On-Site Calibration Quote
Durometer Test Blocks Mechanical Hardness   Calibration Quote
Durometers Mechanical Hardness Schedule On-Site Calibration Quote
Dynamometers Mechanical Force/Torque/Tension Schedule On-Site Calibration Quote
Environmental Chambers Mechanical Temperature/Humidity Schedule On-Site Calibration Quote
ESR Meters Electronic Electronic Schedule On-Site Calibration Quote
Feeler Gages Hard Gage Hard Gage Schedule On-Site Calibration Quote
Film Thickness Gages Mechanical Surface Finish Schedule On-Site Calibration Quote
Flow Meters Mechanical Flow   Calibration Quote
Force Gages* Mechanical Force/Torque/Tension Schedule On-Site Calibration Quote
Freezers Mechanical Temperature/Humidity Schedule On-Site Calibration Quote
Frequency Counters Mechanical Time & Frequency Schedule On-Site Calibration Quote
Function Generators Electronic Electronic Schedule On-Site Calibration Quote
Furnaces Mechanical Temperature/Humidity Schedule On-Site Calibration Quote
Gage Amplifiers Hand Tool Hand Tool Schedule On-Site Calibration Quote
Gage Blocks Hard Gage Hard Gage Schedule On-Site Calibration Quote
Gauss Meters Electronic Electronic Schedule On-Site Calibration Quote
Gear Wires Hard Gage Hard Gage Schedule On-Site Calibration Quote
Glass Thermometers Mechanical Temperature/Humidity Schedule On-Site Calibration Quote
Gloss Standards Mechanical Surface Finish Schedule On-Site Calibration Quote
Glossmeters Mechanical Surface Finish Schedule On-Site Calibration Quote
Green Hardness Testers Mechanical Hardness Schedule On-Site Calibration Quote
Grounding Wrist/Heel Strap Testers Electronic Electronic Schedule On-Site Calibration Quote
Grounding Wrist/Heel Straps Electronic Electronic Schedule On-Site Calibration Quote
Hardness Standards Mechanical Hardness Schedule On-Site Calibration Quote
Hardness Testers Mechanical Hardness Schedule On-Site Calibration Quote
Height Gage Riser Blocks Hand Tool Hand Tool   Calibration Quote
Height Gages Hand Tool Hand Tool Schedule On-Site Calibration Quote
Height Masters Hand Tool Hand Tool   Calibration Quote
High/Low Limit Switches Electronic Electronic Schedule On-Site Calibration Quote
Hipot Testers Electronic Electronic Schedule On-Site Calibration Quote
Humidity Meters Mechanical Temperature/Humidity Schedule On-Site Calibration Quote
Humidity Recorders Mechanical Temperature/Humidity Schedule On-Site Calibration Quote
Hygrometers Mechanical Temperature/Humidity   Calibration Quote
Indicator Calibrators Hand Tool Hand Tool Schedule On-Site Calibration Quote
Indicators Hand Tool Hand Tool Schedule On-Site Calibration Quote
Inductors Electronic Electronic Schedule On-Site Calibration Quote
Infrared Thermometers Mechanical Temperature/Humidity Schedule On-Site Calibration Quote
Inside Micrometers Hand Tool Hand Tool Schedule On-Site Calibration Quote
Kalmasters Hard Gage Hard Gage   Calibration Quote
Leeb Hardness Testers Mechanical Hardness Schedule On-Site Calibration Quote
Length Standards Hard Gage Hard Gage Schedule On-Site Calibration Quote
Levels Hand Tool Hand Tool Schedule On-Site Calibration Quote
Light Meters Electronic Electronic Schedule On-Site Calibration Quote
Load Cells Mechanical Force/Torque/Tension Schedule On-Site Calibration Quote
Magnetic Thickness Testers Hand Tool Hand Tool Schedule On-Site Calibration Quote
Magnetometers Electronic Electronic Schedule On-Site Calibration Quote
Magnification Check Scales Mechanical Optics Schedule On-Site Calibration Quote
Manometers Mechanical Pressure Schedule On-Site Calibration Quote
Master Discs* Hard Gage Hard Gage Schedule On-Site Calibration Quote
Megohmmeter Electronic Electronic Schedule On-Site Calibration Quote
Melt Flow Indexer Mechanical Flow Schedule On-Site Calibration Quote
Micrometer Masters Hard Gage Hard Gage   Calibration Quote
Microscopes Mechanical Optics Schedule On-Site Calibration Quote
Moisture Analyzers Mechanical Chemical Schedule On-Site Calibration Quote
Mold Strength Testers Mechanical Foundry Schedule On-Site Calibration Quote
Multimeters Electronic Electronic Schedule On-Site Calibration Quote
Ohmmeters Electronic Electronic Schedule On-Site Calibration Quote
Optical Attenuators Electronic Fiber Optics Schedule On-Site Calibration Quote
Optical Comparators Mechanical Dimensional Inspection Schedule On-Site Calibration Quote
Optical Flats Mechanical Optics   Calibration Quote
Optical Power Meters Electronic Fiber Optics Schedule On-Site Calibration Quote
Optical Source Modules Electronic Fiber Optics Schedule On-Site Calibration Quote
Oscilloscopes Electronic Electronic Schedule On-Site Calibration Quote
Outside Micrometers Hand Tool Hand Tool Schedule On-Site Calibration Quote
Ovens Mechanical Temperature/Humidity Schedule On-Site Calibration Quote
Panel Meters Mechanical Process Control Schedule On-Site Calibration Quote
Parallels Hard Gage Hard Gage   Calibration Quote
Permeability Standards Mechanical Foundry Schedule On-Site Calibration Quote
Permmeters Mechanical Foundry Schedule On-Site Calibration Quote
pH Meters Mechanical Chemical Schedule On-Site Calibration Quote
Pi Tapes Hand Tool Hand Tool   Calibration Quote
Pin Brinell Hardness Testers Mechanical Hardness Schedule On-Site Calibration Quote
Pin Gages Hard Gage Hard Gage Schedule On-Site Calibration Quote
Pipettes Mechanical Chemical Schedule On-Site Calibration Quote
Pitch Micrometers Hand Tool Hand Tool   Calibration Quote
Pocket Comparators Hand Tool Hand Tool Schedule On-Site Calibration Quote
Power Analyzers Electronic Electronic Schedule On-Site Calibration Quote
Power Meters Electronic Electronic Schedule On-Site Calibration Quote
Power Supplies Electronic Electronic Schedule On-Site Calibration Quote
Pressure Calibrators Mechanical Pressure Schedule On-Site Calibration Quote
Pressure Gages Mechanical Pressure Schedule On-Site Calibration Quote
Pressure Sensors Mechanical Pressure Schedule On-Site Calibration Quote
Protractors Hand Tool Hand Tool Schedule On-Site Calibration Quote
Q Meters Electronic Radio Frequency (RF) Schedule On-Site Calibration Quote
Radio Frequency (RF) Power Meters Electronic Radio Frequency (RF) Schedule On-Site Calibration Quote
Radiometers Electronic Electronic Schedule On-Site Calibration Quote
Radius Gages Hard Gage Hard Gage   Calibration Quote
Reference Specimens Hard Gage Hard Gage   Calibration Quote
Refractometers Mechanical Chemical Schedule On-Site Calibration Quote
Refrigerators Mechanical Temperature/Humidity Schedule On-Site Calibration Quote
Resistance Temperature Detector Mechanical Temperature/Humidity Schedule On-Site Calibration Quote
Resistors Electronic Electronic Schedule On-Site Calibration Quote
Reticle Comparators Mechanical Optics Schedule On-Site Calibration Quote
Rockwell Superficial Testers Mechanical Hardness Schedule On-Site Calibration Quote
Roundness Standards Hard Gage Hard Gage Schedule On-Site Calibration Quote
Roundness Testers Mechanical Dimensional Inspection Schedule On-Site Calibration Quote
Sand Rammers Mechanical Foundry Schedule On-Site Calibration Quote
Sand Strength Testers Mechanical Foundry Schedule On-Site Calibration Quote
Scale Lupes Mechanical Optics   Calibration Quote
Scales Mechanical Mass Schedule On-Site Calibration Quote
Scopemeters Electronic Electronic Schedule On-Site Calibration Quote
Screw Pitch Gages Hard Gage Hard Gage   Calibration Quote
Setting Fixtures Hand Tool Hand Tool Schedule On-Site Calibration Quote
Shadowgraph Comparators Mechanical Dimensional Inspection Schedule On-Site Calibration Quote
Signal Generators Electronic Electronic Schedule On-Site Calibration Quote
Sine Bars Hard Gage Hard Gage   Calibration Quote
Snap Gages Hand Tool Hand Tool Schedule On-Site Calibration Quote
Soldering Irons Electronic Electronic Schedule On-Site Calibration Quote
Soldering Pots Electronic Electronic Schedule On-Site Calibration Quote
Soldering Stations Electronic Electronic Schedule On-Site Calibration Quote
Sound Level Meters Electronic Electronic Schedule On-Site Calibration Quote
Spacer Blocks Hard Gage Hard Gage Schedule On-Site Calibration Quote
Spectrum Analyzers Electronic Electronic Schedule On-Site Calibration Quote
Spline Plugs* Hard Gage Hard Gage Schedule On-Site Calibration Quote
Spline Rings Hard Gage Hard Gage   Calibration Quote
Spring Testers Mechanical Force/Torque/Tension Schedule On-Site Calibration Quote
Squares Hand Tool Hand Tool   Calibration Quote
Stage Micrometers Mechanical Optics   Calibration Quote
Steel Rules Hand Tool Hand Tool   Calibration Quote
Stopwatches Mechanical Time & Frequency Schedule On-Site Calibration Quote
Straight Edges Hand Tool Hand Tool   Calibration Quote
Strip Recorders Mechanical Process Control Schedule On-Site Calibration Quote
Stroboscopes Mechanical Time & Frequency Schedule On-Site Calibration Quote
Surface Finish Standards Hard Gage Hard Gage Schedule On-Site Calibration Quote
Surface Plates Mechanical Dimensional Inspection Schedule On-Site Calibration Quote
Surface Profile Gages Mechanical Surface Finish Schedule On-Site Calibration Quote
Surface Roughness Testers Mechanical Surface Finish Schedule On-Site Calibration Quote
Tachometers Mechanical Time & Frequency Schedule On-Site Calibration Quote
Tape Measures Hand Tool Hand Tool Schedule On-Site Calibration Quote
Taper Gages Hard Gage Hard Gage Schedule On-Site Calibration Quote
Tapered Plug Gages Hard Gage Hard Gage Schedule On-Site Calibration Quote
Tapered Ring Gages Hard Gage Hard Gage Schedule On-Site Calibration Quote
Tapered Thread Plug Gages Hard Gage Hard Gage   Calibration Quote
Tapered Thread Rings Hard Gage Hard Gage   Calibration Quote
Telescope Gages Hand Tool Hand Tool   Calibration Quote
Temperature Calibrators Mechanical Temperature/Humidity Schedule On-Site Calibration Quote
Temperature Controllers Mechanical Temperature/Humidity Schedule On-Site Calibration Quote
Temperature Recorders Mechanical Temperature/Humidity Schedule On-Site Calibration Quote
Tensile Testers Mechanical Force/Torque/Tension Schedule On-Site Calibration Quote
Test Indicators Hand Tool Hand Tool Schedule On-Site Calibration Quote
Thermistors Mechanical Temperature/Humidity Schedule On-Site Calibration Quote
Thermocouples Mechanical Temperature/Humidity Schedule On-Site Calibration Quote
Thermohygrometers Mechanical Temperature/Humidity Schedule On-Site Calibration Quote
Thickness Gages Hand Tool Hand Tool Schedule On-Site Calibration Quote
Thickness Standards Hard Gage Hard Gage Schedule On-Site Calibration Quote
Thread Plugs* Hard Gage Hard Gage Schedule On-Site Calibration Quote
Thread Rings* Hard Gage Hard Gage Schedule On-Site Calibration Quote
Thread Setting Plugs* Hard Gage Hard Gage Schedule On-Site Calibration Quote
Thread Wires Hard Gage Hard Gage   Calibration Quote
Timers Mechanical Time & Frequency Schedule On-Site Calibration Quote
Torque Screwdrivers Mechanical Force/Torque/Tension Schedule On-Site Calibration Quote
Torque Testers Mechanical Force/Torque/Tension   Calibration Quote
Torque Transducers Mechanical Force/Torque/Tension   Calibration Quote
Torque Watches Mechanical Force/Torque/Tension Schedule On-Site Calibration Quote
Torque Wrenches Mechanical Force/Torque/Tension Schedule On-Site Calibration Quote
Tri-Roll Thread Comparators Hand Tool Hand Tool   Calibration Quote
True Position Gages Hand Tool Hand Tool Schedule On-Site Calibration Quote
Ultrasonic Thickness Testers Mechanical Surface Finish Schedule On-Site Calibration Quote
Universal Linear Measuring (ULM) Machine Mechanical Dimensional Inspection Schedule On-Site Calibration Quote
V Blocks Hard Gage Hard Gage   Calibration Quote
Vacuum Gages Mechanical Pressure Schedule On-Site Calibration Quote
Video Measuring Machines Mechanical Dimensional Inspection Schedule On-Site Calibration Quote
Viscometers Mechanical Chemical   Calibration Quote
Viscosity Solutions Mechanical Chemical Schedule On-Site Calibration Quote
Voltmeters Electronic Electronic Schedule On-Site Calibration Quote
Weights Mechanical Mass   Calibration Quote
X-Y Recorders Mechanical Process Control Schedule On-Site Calibration Quote
Zahn Cups Mechanical Chemical   Calibration Quote

*Some limitations. Please contact us today to learn more.

On-Site Calibration

All of the benefits. None of the hassles.

Schedule Today