Onsite Contract Measurement and Inspection Services
Sometimes, its just not practical to move the part you are needing inspected to wherever it needs to go - whether it be too large, too heavy or simply too integral to the process that it cannot be moved. These situations undoubtedly cause a headache for anyone responsible for the quality of that part.
With Fox Valley Metrology's onsite measurement and 3D scanning services, you no longer need to worry.
Our wide range of dimensional inspection services (including first article inspection, CAD model comparisons, reverse engineering and machine geometry checks) can all be completed right where your parts are at.
You can now forget about needing to come up with advanced logistical plans just to get the parts to inspection.
Benefits of Onsite Dimensional Measurement
Measurement Capability Expansion
Expand your investment capabilities with no need to purchase expensive inspection equipment.
Scrap and Rework Reduction
With nearly immediate inspection results, control your manufacturing processes tighter than ever possible before.
Inspection Backlog Minimization
Offload your inspection backlog onto Fox Valley Metrology and never worry about staffing issues again.
Logistics Hassles Elimination
No need to worry about how to get the items to an off-site inspection location - saving you time, money and headaches.
COMMON APPLICATIONS FOR ONSITE MEASUREMENT
Large Or Heavy Parts
Parts that are too large for your current inspection setup or are simply too large to move safely.
In-Process Inspections
Verification of parts that are currently being manufactured or components that are integral to the manufacturing system.
Large Fixture Calibration
Eliminate downtime by having your large fixtures essential for production calibrated at your facility, rather than being shipped out.
Service Options
Contact Measurement
Rapid touch-probe inspection of parts that are impractical or not possible to be inspected on a traditional bridge CMM system.
3D Scanning
Laser line probe 3D scanning for when a part or tool is so complex, you can’t use contact probes to capture all of its measurements.
Service Offerings
Our ISO 17025 accredited onsite inspection service offerings include:
- First Article Inspection
- CAD Model-to-Part Comparisons
- In-Process Inspection
- Statistical Sampling
- Reverse Engineering
- Fixture Calibrations
- Custom Gaging Calibrations
- 3D Scanning
- Tool and Die Verifications
- Many More...
Contact Measurement Specifications
- Equipment Used: Faro Quantum Max S 2.5m
- Probe Options: 3 mm and 6 mm
- Measurement Uncertainty: 0.0014 in
3D Scanning SPECIFICATIONS
- Equipment Used: Faro Quantum Max S 2.5m
- Scanner Used: Faro xP Laser Line Probe
- Equipment Accuracy: 0.0017 in